Fabric thank you card

I saw these at Style Me Pretty and thought it is so pretty that I had to share. Of course with any lovely DIY item, an instruction is included.

Materials Needed:
Sewing Machine
Pinking Shears or Rotary Cutter
One piece of Ultrasuede fabric
Satin Ribbon
Coordinating Threads
Metal Ruler
X-acto Knife

Instructions:
Step 1: With scissors, trim ultrasued to 5.5″ x 8.75″. Cut a piece of coordinating ribbon to 20″ long. Align Ribbon to the center of the fabric lengthwise and pin about 3.5″ down from the top on the right side of fabric. Secure ribbon with a sewing machine. Fold bottom of the envelope up about 2.5″. Sew both sides shut with a sewing machine.

Step 2: Measure .5″ in from the top center of the envelope. With an x-acto knife, cute a straight line through the fabric just wide enough to accommodate your ribbon. Measure .25″ up and repeat the same cut. Thread ribbon through slots.

Step 3: Place a standard 4-Bar card in the envelope or download this template of cards and print out onto card stock on your home printer. Follow the instructions in the template on how to trim out.

Step 4: Once the card is placed in the envelope fold top over and pull snug. Using pinking shears or ruler and rotary pinking cutter, trim each side to get the decorative scalloped edge. Make sure to do this step last so that the scallop edges line up. Snip ends of ribbon to points and tie in a bow!